The user friendly Manual Pool Vacuum

Hammer-Head Pool Cleaners

The battery powered Hammer-Head is a totally self-contained manual vacuum that comes in the popular 30”(76cm) commercial model, ideal for all public pools or the 21”(53cm) service model better suited to small pools and servicemen. All the hassles and hazards associated with conventional pumps, vacuum hoses, extension cords, power outlets, etc. are now a thing of the past.

Set-up is quick and simple. Wheel out the Hammer-Head, attach the hand pole, place the Hammer-Head in the pool, turn it on and you are immediately cleaning. Your set-up time is literally seconds.

The Hammer-Heads self-contained, high capacity and easy to clean filter bags make debris collection a breeze. The units come with an 18m long tough flotation cord. The Hammer-Head pumps an astounding 1000 l/min.

They come with their own caddy cart allowing easy manoeuvrability in and out of storage areas and to and from the pool. The complete unit stores in a small area. The large diameter wheels make handling a breeze, up and down stairs, and through doorways – it’s all so easy. The Hammer-Head has been developed by pool servicemen with the rigours of every day use in mind.

The Service Units features:

SERVICE UNITS – FOR POOL ROUTE TECHNICIANS

Service-21 and Service-30 units are meant for pool-to-pool route work, and include a mount assembly for transport. Mount assemblies (HH1300) are compatible with any 5cm hitch receiver. The two standard units are the Service-21, which has a 21″ (53cm) vacuum head and a 40ft power cord, and the Service-30, which has a 30″ (76cm) vacuum head and a 18m power cord. Service-21 units are also available with a 18m power cord as an option. (See Optional Configurations below). Service units ship partially assembled. Some assembly and set-up of the vehicle mount is required. (Due to ongoing improvements, products may be slightly different than as pictured).

NOT INCLUDED:

• 12 VOLT DEEP CYCLE MARINE BATTERY
• BATTERY CHARGER
• STANDARD POOL POLE

SPECIFICATIONS:

• 21″ (53cm) OR 30″ (76cm) INJECTION MOLDED VACUUM HEAD
• NON-MARKING, BEARING-LESS, CAST URETHANE HEAD WHEELS
• STAINLESS POLE SWIVEL MOUNT (two position adjustable angle standard on the Service-30)
• ALL STAINLESS HARDWARE
• MARINE GRADE ON/OFF SWITCH OR THE NEW SMART SWITCH™
• 30# THRUST PRESSURIZED MOTOR
• 12m OR 18m FLOATING POWER CORD
• THREE BLADE PROPELLER
• WELDED ALUMINUM CADDY CART
• 20″ MAG BMX-STYLE CART WHEELS
• NON-MARKING SOLID TYRES
• STAINLESS WHEEL BEARINGS
• VEHICLE MOUNT ASSEMBLY (HH1300)
• TWO DEBRIS BAGS (HH1506 AND HH1508)
• SERVICE-21 WEIGHT WITH 27 SERIES MARINE BATTERY: 50kg
• SERVICE-30 WEIGHT WITH 27 SERIES MARINE BATTERY: 51kg
• 21″ (53cm) VACUUM HEAD & MOTOR WEIGHT: 5kg
• 30″ (76cm) VACUUM HEAD & MOTOR WEIGHT: 6kg

OPTIONAL CONFIGURATIONS:

• SERVICE-21-60 (with 18m power cord)
• SERVICE-21-NM (without the vehicle mount assembly)
• SERVICE-30-NM (without the vehicle mount assembly)
• SERV-CART (complete cart assembly only)
• SERV-CART-NM (complete cart assembly without the vehicle mount)

• 12 VOLT DEEP CYCLE MARINE BATTERY
• BATTERY CHARGER
• STANDARD POOL POLE
• BATTERY CASE, BATTERY CONNECTORS, CADDY CART, OR ON/OFF SWITCH
• PLEASE NOTE: Complete vacuum heads do not come with battery-side connections. Wire ends are bare for connection to a Hammer-Head cart or directly to a 12 volt battery using ring terminals or alligator clips.

SPECIFICATIONS:

• 30″ (76cm) INJECTION MOLDED VACUUM HEAD
• CLEARANCE OVER POOL FLOOR = 2.5cm
• NON-MARKING, BEARING-LESS, CAST URETHANE HEAD WHEELS
• STAINLESS POLE SWIVEL MOUNT (two position adjustable angle standard on the HH1320 30″ (76cm) COMPLETE VACUUM HEAD)
• ALL STAINLESS HARDWARE
• 30# THRUST PRESSURIZED MOTOR
• 12m OR 18m FLOATING POWER CORD
• THREE BLADE PROPELLER
• ONE DEBRIS BAG (HH1508 SUPERFINE)
• 30″ (76cm) VACUUM HEAD & MOTOR WEIGHT: 6kg